開會無阻礙,溝通麵對麵        會議新視界,交流零距離
國內正品行貨,全國低價,三年質保,裝後付款,國內一線城市提供上門安裝服務,遠程指導!項目負責人聯係電話:023-68791071

TE60連接三個攝像機如何控製

華為視頻會議TE60可以同時連接三個攝像機:HD-VI接口可同時連接兩個HUAWEI VPC600或者VPC620高清攝像機,DVI-I接口用於連接主攝像機,輸入主視頻圖像。
HD-VI接口標配HUAWEI VPC600/VPC620,連接後,無需其他線纜即可實現對HUAWEI VPC600/VPC620的PTZ控製和供電。
DVI-I接口連接攝像機後,必須將VISCA控製信號線纜連接至終端的COM接口,才能進行攝像機PTZ控製。
登錄TE60 Web界麵,選擇“係統配置 > 輸入輸出”,單擊“視頻輸入”頁簽,正確選擇所連接的攝像機的類型,和正確選擇與攝像機控製接口相連的串口後,才能控製攝像機。

VPC620.png

The TE60 can connect to three cameras at the same time. The HD-VI port can be connected to two HUAWEI VPC600 or VPC620 HD cameras at the same time. The DVI-I port can be connected to the center camera for video input.
The HD-VI port is connected to the HUAWEI VPC600/VPC620. After the connection, the HD-VI port can be used to control the PTZ and supply power to the HUAWEI VPC600/VPC620.
After connecting a camera to the DVI-I port, connect the VISCA control signal cable to the COM port on the endpoint.
Log in to the TE60 web interface, choose System Settings > Input/Output, and click the Video Input tab. Select the type of the camera to be connected and the serial port connected to the camera control port.